Call:8143862822

AP - RO 50/100 Ltr

250 GPD High Pressure pump of Aqua Purus N.F.S. Approved, leak proof connectors, fittings and tubes N.F.S. Approved, Non-Toxic Filter Housing made up of food grade polymers Fully automatic system with auto ON/OFF facility.High purifying capacity of Aqua Purus Membrane which produces 12 liter water per hour. Purifies impure water to sweet pure drinking water. Removes bacteria and virus Availability of water as per requirement, even in absence of electricity.Low cost of maintenance and consumables.

Flow Rate : 50 LPH Power Consumption : 80-100 Watt(in use) Power Supply : 230 VAC Dimensions (H x W x D) : 45cm x 25cm x 85cm Min. Feed Water Pressure: 1.5 Kg/cm2 Dimensions L x W x H : 45cm x 25cm x 85cm Separate Storage Tank : Optional RO Membrane : 75 GPD (5 Nos) Aqua Purus: Membrane Booster Pump: 250 GPD (2 No) Max. Feed Water TDS (Total Dissolved Solids): 1500 ppm Max. Feed Water Hardness: 400 ppm Input voltage : 160-300V AC (50Hz)

Stage 1 : 5Micron Sediment Filter
With five micron rating, it is effective in removing dirt, rust and sand particles.

Stage 2 : 5 Micron Inline Sediment Filter
Organic chemicals removal : With five micron rating, it is effective in removing dirt, rust and sand particles.

Stage 3 : Granular Activated Pre Inline Carbon Filter
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.

Stage 4 :Reverse Osmosis Membrane
A thin film composite high quality Aqua Purus membrane processes 75 gallons water per day. It removes the hard water contaminants that may be present in water, like - lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite and selenium. It also removes Bacteria and Virus from water.

Stage 5 : Post Carbon Inline Filter
It removes objectionable tastes and odors to enhance the quality of drinking water.

Flow Rate : 50 LPH Power Consumption : 80-100 Watt(in use) Power Supply : 230 VAC Dimensions (H x W x D) : 45cm x 25cm x 85cm Min. Feed Water Pressure: 1.5 Kg/cm2 Dimensions L x W x H : 45cm x 25cm x 85cm Separate Storage Tank : Optional RO Membrane : 75 GPD (5 Nos) Aqua Purus Membrane Booster Pump: 250 GPD (2 No) Max. Feed Water TDS (Total Dissolved Solids): 1500 ppm Max. Feed Water Hardness: 400 ppm Input voltage : 160-300V AC (50Hz)

Wallmount RO Systems

Undersink Water Purifier

Commercial RO Systems

Dispensers

Specification
Description Commercial - 50 LPH RO
Flow Rate 50 LPH
Max Duty Cycle 400 LDP
Filter Cartridge Sediment, Activated Carbon and Post Carbon
Power Consumptions 80-100 Watt
Min. Feed Water Pressure 1.5 Kg/cm2
Dimensions L x W x H 45cm x 25cm x 85cm
Separate Storage Tank Optional
RO Membrane 75 GPD (5 Nos), Aqua Purus Membrane
Booster Pump 250 GPD (2 No)
Max. Feed Water TDS (Total Dissolved Solids) 1500 ppm
Max. Feed Water Hardness 400 ppm
Input voltage 160-300V AC (50Hz)

We offer Compact 100 LPH R.O Plant that is the best system for filtration and purification needs of drinking water. Reverse osmosis plants are used to produce high-quality Pure drinking water. Ideal for Office and Institution. Plant Application: Domestic RO Plant RO Capacity (Liter/hour): 100 (Liter/hour) Max Water Recovery Rate: 50-55 %

Advantages:

Ideal for Schools, Hospitals, Factories, Restaurants.

No need to buy expensive water jar for drinking.

100% pure and safe water for your requirements.

Require minimum space near your water cooler.

Compatible with water cooler and water Dispenser.

Purify any type of water like Underground water or Supply water.

Auto cut-off and auto start with water level sensor (Optional part).

Max duty cycle 500-700 ltr per day ( with 10 min. rest on every 2 hours)

Easy to maintain and clean.

Specification
Description Commercial - 100 LPH RO
Purification capacity 100±20* Litres per hour
Max Duty Cycle 500-700 liters per Day
Membrane 3 No’s
7 stagesPurification 1) Pre-Candle, 2) Sediment, 3)Activated Carbon, 4)RO-UF, 5)UV System, 6)Post Corbon, 7) TDS Minimiser
RO Membrane 300 GPD
UV System 11 Watt
Minimum Inlet Water Pressure 0.3 kg/sq cm
Maximum Inlet water Pressure 2 kg/sq cm ( if input water pressure is more than 2kg/sq cm , install PRV before the Unit)
Input Voltage 160-300V AC ( 50Hz)
Operating Voltage 48V DC
Input water Temperature Min 5 Celsius & Max 50 Celsius
Total Dissolved Solids (TDS) Up to 2000 ppm
Total Hardness 500 ppm (max)
Rejection of TDS Up to 95%
Recovery Up to 25%
Dimensions (mm) W 485 x D 300 x H 840
Net Weight 25 kgs.
Power rating 150 W